Introducing the Velossa Tech 2015-2017 Ford F-150 and 2017-2020 Ford F-150 Raptor Dual BIG MOUTH Ram Air Intake Snorkels, available in Quad ram and Dual ram (current listing) configurations.

The F-150 Dual BIG MOUTH Ram Air features two separate and functional ram air inlet points with stylized inlet flares with full Color Chasing RGBW LEDs controlled via the BanlanX App or the supplied Bluetooth remote control. All wiring is supplied in the kit, and a color installation manual is downloadable from our Installation section (see below).

Each ram air duct feeds high speed air to the cavity above the radiator support which in turn feeds the intake cowl, this boosts mass air flow (see data below) and reduces vacuum work. Increasing mass air and reducing vacuum work frees up power and boosts fuel economy. The faster the vehicle moves, the higher the air pressure that feeds the BIG MOUTH system and intake cowl and the more performance you get. 

Below is all the data collected over months of testing. All tests were performed with isolation of the singular variable (with and without the ram air) and with utmost consistency of the test conditions. 

NOTE: Inlet temperatures continuously increasing after back to back runs without the ram air system, compared to lower and consistently repeatable inlet turbo inlet temperatures with the BIG MOUTH ram air system installed.

NOTE: Increase in air load (air consumption, which equates to power) after BIG MOUTH installation.

NOTE: Dragy runs use GPS to accurately calculate actual on-road performance of a vehicle. This test method is the best way to measure actual performance in real world conditions where a ram air intake really shines. Results indicate an increase in horsepower as the vehicle picks up speed. Top end performance shows a respectable increase in both ET and trap speed.

If you already have a Generation 4 BIG MOUTH, don't fret, instead of a whole new kit! Just bolt on your flares to your Gen 4 and follow the instructions to wire up the kit and you are good to go!

Get LIT with a Velossa Tech "LIT KIT" and blow people away when you light up the night (or day!) with Color Chasing (RGBW) LEDs with Bluetooth capability via the BanlanX phone app, and handheld remote!

All quality electronics are supplied in the kit, full color instructions are downloadable, and 24/7 customer support is available should you need us. 

The allows you to swap your current Gen 4 flares to be LIT with ease by bolting on the LIT flares with a few set screws.

Features

• Color Chasing Bluetooth RGBW control
• Fuse tap, all wiring and fuse included in kit along with all hardware necessary
• Weatherproof RGBW Color Chasing LEDs integrated and pre-assembled into the serviceable flare (the LED's can be accessed if necessary)
• Maximum performance ram air design, optimized inlet flare and convergent duct
• Finished smooth, for maximum airflow
• OEM fitment
• No permanent modification necessary
• No tune necessary (although beneficial if you tune with the BIG MOUTH)
• Made in the USA

How It Works
As a car moves through the air, the air pressure directly in front of the bumper increases with the square of speed. The BIG MOUTH is strategically designed and positioned for maximum air pressure recovery. Basically, it feeds your current intake with higher pressure air. It is the same concept as driving below sea level where the air pressure is higher, except you are able to generate higher inlet pressures with a properly designed ram duct such as the BIG MOUTH.

Increasing the inlet absolute pressure to your engine has profound effects on performance. Increases in air mass flow, reduction in wastegate duty cycle (for turbo vehicles) and reduced inlet and charge temps are some of the benefits of running a properly designed ram inlet. On top of all that awesome performance comes the BIG MOUTH growl and sinister stare, it sounds and looks great!

Customization
Want your 2015-2017 Ford F-150 or 2017-2020 Ford F-150 Raptor to stand out? The BIG MOUTH "LIT KIT" is the ULTIMATE show stopper. We took our Generation 4 platform to new heights, now you can choose your color, on the fly!

Installation
Installation can be done with basic hand tools. We supply all straightforward color instructions (downloadable below), backed with our 5-star Customer Support to help guide if any questions arise. All hardware is always included (if necessary) in our BIG MOUTH Ram Air kits.

NOTE: From our testing, rain or snow do not adversely affect the engine once a BIG MOUTH is installed. Be cautious in the rain or snow, and drive safe.

When people see that massive inlet flare through the grille, they'll know it's Velossa Tech!